Performance range

Flow rate: Q=5.4~400 m3/s

Head: H=4-125m

Model Description

Example: IS100-65J-200A

IS – Single stage single suction centrifugal clean water pump

100- suction inlet diameter (mm)

65- Discharge outlet diameter (mm)

J-J represents deceleration for use

200- nominal diameter of impeller (mm)

A-A, B, and C respectively indicate that the outer diameter of the impeller has been cut through the first, second, and third times

Main component materials

The material of the overcurrent components is generally ordinary gray cast iron.

Structural characteristics

The pump is installed horizontally, with horizontal axial suction and upward radial discharge. The pump is a suspension type structure, and during maintenance, the inlet and outlet pipelines do not need to be disassembled to exit the rotor

Repair the components. The pump is connected to the motor through ordinary elastic couplings or extended elastic couplings, and the shaft seal of the pump is sealed with soft packing. The bearing is single row Ball bearings are lubricated with lubricating oil.

Complete range

A complete set of pumps, motors, common bases, couplings, etc. are supplied, as well as bottom valves, check valves, and gate valves.